Rotenso WINDMI WIM60X1 R14 6 kW Monobloc Single Phase Air Heat Pump
- Composition of the Rotenso WINDMI WIM60X1 Set
- Outdoor unit
- Wired controller
- Control cable
- DHW tank sensor
- Plate heat exchanger
- Flow sensor
- Diaphragm vessel
- Water pump
- Safety valve
- Vent valve
- Y-type water filter
Rotenso WINDMI WIM60X1 - Monobloc Single Phase Air Source Heat Pump
Rotenso WINDMI WIM60X1 is a single-phase monoblock heat pump with a heating capacity of 6.0 kW (A7/W35). It is a very efficient unit with high energy efficiency class A+++ (for 35°C supply temperature) and A++ (for 55°C supply temperature), with SCOP of 4.75 (for 35°C supply temperature).
The outlet water temperature in heating mode ranges from 20°C to 62°C, and in DHW (hot water) mode from 40°C to 62°C.
Working in Extreme Conditions
The heat pump is designed to operate in extreme weather conditions, down to an outdoor temperature of -25°C. To ensure trouble-free operation at temperatures below 0°C, the unit is equipped with a drip tray heater, the operation of which protects against condensate freezing and flooding of the outdoor unit, preventing damage to the fan and heat exchanger.
The pump also has a compressor crankcase heater, which heats the compressor oil at temperatures below 0°C, allowing trouble-free starting in adverse weather conditions. This technical solution ensures trouble-free operation and extends the life of the compressor, which is the heart of the device.
Booster Heater
Rotenso WINDMI WIM60X1 is equipped with a 3 kW booster heater. In emergency situations or at very low temperatures, it is recommended to use booster heaters to optimize heat pump operation and ensure continuous hot water supply. The use of heaters positively influences the durability and reliability of the device.
Ease of Installation and Quiet Operation
The Rotenso WINDMI heat pump is easy to install, maintain, and use on an ongoing basis. The two-door enclosure design allows easy access to all components for easy servicing. Thanks to a single-fan design, a two-rotary DC compressor and optimized piping, the pump operates very quietly.
Remote Control
The Rotenso WINDMI pump can be controlled via a mobile app or a modern wired controller, providing convenience and full control over the device.
Warranty and Service
Rotenso pumps come with a 5-year warranty, and buyers are assured of professional service. The manufacturer offers free commissioning of the device by an authorized service center, access to a nationwide service network and fast service response time.
Composition of the Rotenso WINDMI WIM60X1 Set
- Outdoor unit
- Wired controller
- Control cable
- DHW tank sensor
- Plate heat exchanger
- Flow sensor
- Diaphragm vessel
- Water pump
- Safety valve
- Vent valve
- Y-type water filter