Rotenso WINDMI WIM80X1 R14 8 kW Monobloc Single Phase Air Heat Pump

Rotenso WINDMI WIM80X1 - Monobloc Single Phase Air Source Heat Pump

Rotenso WINDMI WIM80X1 is a single-phase monoblock heat pump with a heating capacity of 8.0 kW (A7/W35). It is a very efficient unit with high energy efficiency class A+++ (for 35°C supply temperature) and A++ (for 55°C supply temperature), with SCOP of 4.90 (for 35°C supply temperature).

The outlet water temperature in heating mode ranges from 20°C to 62°C, and in DHW (hot water) mode ranges from 40°C to 62°C.

Adaptation to Extreme Conditions

The heat pump is designed to operate in extreme weather conditions, down to an outdoor temperature of -25°C. To ensure reliable operation at temperatures below 0°C, the unit is equipped with a drip tray heater to prevent condensation from freezing and flooding of the outdoor unit. This minimizes the risk of damage to the fan and the exchanger.

In addition, the pump has a compressor crankcase heater, which heats the compressor oil at temperatures below 0°C, allowing the device to start without problems even in harsh weather conditions. This technical solution ensures trouble-free operation and extends the life of the compressor, which is the heart of the heat pump.

Booster Heater

The Rotenso WINDMI WIM80X1 heat pump is equipped with a 3 kW booster heater. In emergency situations or at very low temperatures, it is recommended to use booster heaters to optimize the operation of the unit and ensure continuous supply of hot water. The use of heaters contributes to the durability and reliability of the heat pump.

Ease of Installation and Quiet Operation

The Rotenso WINDMI heat pump is easy to install, maintain, and use on an ongoing basis. The two-door enclosure design provides easy access to all components for easy servicing. Thanks to a single-fan design and a two-rotary DC compressor, as well as optimized piping, the pump features quiet operation.

Remote Control

The Rotenso WINDMI pump can be controlled using both a mobile app and a modern wired controller, giving users full convenience in managing the operation of the device.

Warranty and Service

Rotenso pumps come with a 5-year warranty, and buyers are assured of professional service and warranty care. The manufacturer offers free commissioning of the pump by an authorized service center, access to a nationwide service network and fast service response time.

Composition of the Rotenso WINDMI WIM80X1 Set

• Outdoor unit
• Wired controller
• Control cable
• DHW tank sensor
• Plate heat exchanger
• Flow sensor
• Diaphragm vessel
• Water pump
• Safety valve
• Vent valve
• Y-type water filter