Grundfos Magna1 32-80 F 220 1x230V PN6/10 Electronic Circulating Pump 99221275
Special offer
Grundfos Magna1 32-80 F 220 1x230V PN6/10 Electronic Circulating Pump 99221275
- MAGNA1 32-80 F No. 99221275 Suitable for Heating in commercial buildings Air-conditioning in commercial applications District heating networks Cooling networks Residential heating Industrial heating
Brand
Entity responsible for this product in the EU
GRUNDFOS POMPY SP.Z O.O.More
Address:
KLONOWA 23 BARANOWOPostal code: 62-081City: PRZEŹMIEROWOCountry: PolenE-mail: info_gpl@grundfos.com
Symbol
99221275
Producer code
5712608942488
Series
Warranty
Manufacturer's Index
99221275
Magna1 32-80 F 220 1x230V PN6/10 pump 99221275
MAGNA1 is an electronic circulation pump designed for simple heating, air conditioning and hot water circulation systems. The device works well in both heating and cooling circuits, as well as in a stainless steel version, ideal for domestic hot water
- The simple design guarantees top energy efficiency and easy integration into building management systems - a cost-effective alternative to the MAGNA3 pump
- The pump provides continuous monitoring of operation, including fault detection, and a digital input allows remote start and stop
- The dual pump function allows automatic switching to the second unit in the event of a failure - an efficient pump takes over the entire flow, minimizing the load on the system
TECHNICAL SPECIFICATIONS
| Potential-free switching contact: | yes |
| Frequency: | 50/60 Hz |
| Installation length: | 180 mm |
| Material grade: | GG 20 cast iron (GJL-200) |
| Pulse counter interface: | no |
| PT100 / PT1000 / PTC interface: | no |
| PWM (pulse width modulation) interface: | no |
| Flange pressure class: | PN 10 |
| Device pressure class: | PN 10 |
| IEC insulation class: | F |
| Oval flange: | no |
| Number of phases: | 1 |
| Max. operating pressure: | 10 bar |
| Max. medium temperature (continuous): | 110 °C |
| Max. capacity (max. flow): | 5.09 m³/h |
| Max. head: | 8 m |
| Body material: | Cast iron |
| Impeller material: | Plastic |
| Minimum medium temperature (continuous): | -10 °C |
| Switching voltage: | 1 x 230 V |
| Protocol support (BACnet IP, BACnet MS/TP, CAN/CANOpen, EtherNet/IP, KNX, LIN Bus, LON/LONWorks, Modbus RTU, Modbus TCP, PROFIBUS, PROFINET IO, RS-232, RS-485): | no |
| Power consumption of pump (solpump): | 151 W |
| Motor power consumption (P1): | 0.151 kW |
| Electrical connection: | Other |
| Dual pump: | no |
| Rated current: | 1.22 A |
| Speed: | 4041 1/min |
| Nominal flow rate (BEP): | 5.09 m³/h |
| Motor speed control: | Built-in |
| Connection type: | Flange |
| Pump body connection size: | DN 32 |
| Speed control method: | Stepless |
| Wireless communication standard: | no |
| Degree of protection (IP): | IPX4 |
| Interface signal (0-10 V / 2-10 V, 0-20 mA / 4-20 mA): | no |
| Width 1: | 69 mm |
| Width 2: | 111 mm |
| Average temperature (continuous operation): | -10 ... 110 °C |
| Nominal diameter: | DN 32 |
| Ambient temperature: | 0 ... 40 °C |
| Energy efficiency index (EEI): | 0.2 |
| Pump switch: | Other |
| Head at nominal flow: | 56.18 kPa |
| Head at nominal flow (BEP): | 59.32 kPa |
| Pump height: | 142 mm |
| Rated voltage range: | 230 ... 230 V |
| Communication connector: | Possible with accessories |
Ask a question