Acoustic alarm verification module SATEL INT-AV audio module intercom eavesdropping 12 V DC 35 mA
- INT-AV acoustic alarm verification module for SATEL INTEGRA control panels. Enables remote eavesdropping and broadcasting of messages. 12 V DC (±15%) power supply.
Subscription products in your shopping cart
Set one delivery frequency for all subscription products in your cart every:
Subscription products in your shopping cart
INT-AV - acoustic alarm verification module
INT-AV is an acoustic alarm verification module designed for the SATEL alarm control panels of the INTEGRA family. It enables remote eavesdropping on the situation in the protected premises and local broadcasting of messages from the monitoring station.
- Audio alarm verification to eliminate false alarms
- Local broadcasting of messages from the monitoring station
- Two-way audio transmission between intercoms and telephone line
- Support for up to 4 intercoms operating in half-du modepLex
- Microphone tamper detection function
Acoustic alarm verification
The INT-AV module enables initial remote threat assessment by eavesdropping on the situation in the protected premises. This allows the operator to verify whether the alarm signal is actually due to a real event or whether it is a false trigger.
This solution helps reduce the number of unnecessary interventions, saving time and costs for intervention services. Audio verification also enhances the safety of service personnel by allowing them to assess the situation before physical intervention.
Two-way audio communication
INT-AV provides two-way audio transmission between intercoms and the telephone line. This makes it possible not only to eavesdrop, but also to transmit voice messages to people in the facility.
The module supports up to 4 intercoms operating in half-dupLex mode, allowing to build a simple voice communication system within the protected facility. The function of broadcasting messages from the monitoring station allows to transmit instructions and commands in emergency situations.
Safety and reliability of operation
INT-AV is equipped with a microphone tamper detection function, which increases the level of protection of the system against attempts to intentionally disable it. The module is suitable for operation in a wide range of temperatures and high humidity.
Environmental parameters in accordance with environmental class II according to EN50130-5 allow the device to be used in typical conditions found in protected facilities. The compact dimensions of the electronics board make it easy to install the module in control panel enclosures and system modules.
Technical data
| Parameter | Value |
|---|---|
| Supply voltage (±15%) | 12 V DC |
| Standby current consumption | 35 mA |
| Maximum current consumption (INT-AV + 1× INT-AVT) | 160 mA |
| Maximum current consumption (INT-AV + 4× INT-AVT) | 500 mA |
| Electronics board dimensions | 57 × 80 mm |
| Operating temperature range | -10...+55 °C |
| Maximum humidity | 93 ± 3% |
| Environmental class according to EN50130-5 | II |
Technical data source:data sheet of INT-AV model Link
FAQ - frequently asked questions
What is the INT-AV module used for?
INT-AV is used for acoustic alarm verification by remotely eavesdropping on the situation in the protected facility and for broadcasting messages from the monitoring station.
Does INT-AV help reduce false alarms?
Yes, acoustic alarm verification allows the operator to assess the actual situation and thus eliminate false alarms.
How many intercoms can the INT-AV support?
The INT-AV module supports up to 4 intercoms operating in half-dupLex mode.
Is audio communication bidirectional?
Yes, INT-AV supports two-way audio transmission between intercoms and telephone line.
Can messages be broadcast from the monitoring station?
Yes, INT-AV allows local broadcasting of messages from the monitoring station to people in the facility.
What is the supply voltage of the INT-AV?
The power supply voltage of the INT-AV module is 12 V DC with a tolerance of ±15%.
What is the standby current consumption?
The standby current consumption of the INT-AV module is 35 mA.
What is the maximum current consumption with one INT-AVT intercom?
The maximum current consumption for INT-AV + 1× INT-AVT configuration is 160 mA.
What is the maximum current consumption with 4 INT-AVT intercoms?
The maximum current consumption for INT-AV + 4× INT-AVT configuration is 500 mA.
In what temperature range can INT-AV operate?
The operating temperature range of the INT-AV module is -10 to +55 °C.
What is the permissible operating humidity?
The maximum operating humidity of the module is 93 ± 3%.
What are the dimensions of the INT-AV electronics board?
The dimensions of the INT-AV electronics board are 57 × 80 mm.
What environmental class does the INT-AV belong to according to EN50130-5?
INT-AV belongs to environmental class II according to EN50130-5.
Does the module have anti-tampering features?
Yes, INT-AV is equipped with a microphone tamper detection function.
Can INT-AV be used in typical conditions of protected facilities?
Yes, the module is suitable for typical conditions of protected facilities due to its environmental class II and appropriate temperature and humidity range.
Can the actual appearance of INT-AV differ from the illustrative materials?
Yes, the manufacturer stipulates that the actual appearance of the products may differ from the products shown in the images.
Are the descriptions in the manufacturer's materials informative?
Yes, the posted product descriptions are for informational purposes only.
INT-AV is a specialized acoustic alarm verification module designed for cooperation with alarm control panels SATEL. It combines the functions of eavesdropping, two-way audio communication and local broadcasting of messages from the monitoring station.