LTE UMTS GSM communication antenna SATEL ANT-LTE-O external SMA male for control panels

ANT-LTE-O antenna for mobile communicators with SMA connector

ANT-LTE-O antenna is designed to work with PBXs and modules equipped with mobile communicators having a standard SMA-type connector. It can also be used - with the use of an appropriate adapter - with other devices operating in LTE, UMTS/HSPA+ and GSM/GPRS/EDGE technologies.

• Designed for SATEL exchanges and modules with cellular communicators
• Standard SMA type male connector
• Capable of working with devices in LTE, UMTS/HSPA+, GSM/GPRS/EDGE technologies
• Use with PERFECTA 16, 16-WRL, 32, 32-WRL, 32 LTE, 32-WRL LTE control panels
• Mounting on the outside of the device housing

Application of ANT-LTE-O antenna

ANT-LTE-O antenna is an accessory designed for burglar alarm systems that use cellular communication. The manufacturer indicates its use with modules and control panels equipped with cellular communicators, such as GPRS-A, GPRS-A LTE and PERFECTA control panels sold without casing, including PERFECTA 16, PERFECTA 16-WRL, PERFECTA 32, PERFECTA 32-WRL, PERFECTA 32 LTE and PERFECTA 32-WRL LTE.

Using an IPX-SMA adapter, the antenna can also be used with other devices from different manufacturers, as long as they work with LTE, UMTS/HSPA+ or GSM/GPRS/EDGE technologies and have the appropriate intermediate connector. Thus, one accessory can support a wide range of communication devices in alarm systems and other installations requiring cellular connectivity.

Design and mounting

ANT-LTE-O is equipped with a standard SMA-type male connector, which facilitates direct connection to compatible cellular communicators without the need for non-standard adapters. This solution ensures a stable mechanical connection and secure electrical contact between the antenna and the device.

The antenna is designed to be mounted on the outside of the device's housing, which facilitates optimal location of the antenna in relation to radio signal propagation conditions. Such a mounting method allows to increase the efficiency of cellular communication in areas with weaker signal and improve the reliability of data transmission in alarm systems.

Technical data

Technical data source:datasheet of ANT-LTE-O model Link

FAQ - the most common questions about ANT-LTE-O

1. What devices is the ANT-LTE-O antenna designed for?

The ANT-LTE-O antenna is designed for PBXs and modules equipped with cellular communicators with a standard SMA male connector, including but not limited to GPRS-A, GPRS-A LTE and PERFECTA series PBXs sold without an enclosure.

2. With which PERFECTA PBXs does the antenna work?

The manufacturer indicates that the antenna can be used with PERFECTA 16, PERFECTA 16-WRL, PERFECTA 32, PERFECTA 32-WRL, PERFECTA 32 LTE and PERFECTA 32-WRL LTE control panels.

3. What mobile communication technologies does ANT-LTE-O support?

The antenna can work with devices operating on LTE, UMTS/HSPA+ and GSM/GPRS/EDGE technologies.

4. What type of connector does the ANT-LTE-O antenna have?

ANT-LTE-O is equipped with a standard SMA-type male connector for direct connection to compatible mobile communicators.

5. Can the antenna be used with devices other than SATEL exchanges ?

Yes, with the use of IPX-SMA adapter it is possible to use the antenna also with other devices operating in LTE, UMTS/HSPA+ and GSM/GPRS/EDGE technologies, as long as they are adapted for such connection.

6. Where should the ANT-LTE-O antenna be mounted?

The antenna is designed to be mounted on the outside of the device's housing, which is conducive to better cellular signal reception and transmission conditions.

7. Is ANT-LTE-O a component of a burglar alarm system?

ANT-LTE-O is an accessory in the category of antennas designed for burglar alarm systems, supporting the cellular communication of these systems.

8. Does the antenna work with LTE communication in SATEL control panels ?

Yes, the antenna has been designed to work with devices operating in LTE technology, including, among others, GPRS-A LTE modules and PERFECTA PBXs with LTE communication.

9. Are special connectors required to connect the antenna?

In devices with a standard SMA connector, the antenna can be connected directly, while in other cases the manufacturer stipulates the use of an IPX-SMA adapter.

10. Can the actual appearance of the antenna differ from the catalog photos?

The manufacturer informs that the actual appearance of the products may differ from the products shown in the photos, and the descriptions in the materials are for informational purposes only.

11. Is ANT-LTE-O intended for indoor use only?

No. The antenna is designed to be mounted on the outside of the device's housing, which allows it to be used in places where it is required to take the antenna outside the housing of the PBX or module.

12. Does the antenna support GPRS and EDGE data transmission?

Yes, according to the data sheet, the antenna is compatible with devices operating in GSM/GPRS/EDGE technologies.

13. Can ANT-LTE-O be used with a GPRS-A module?

Yes, the manufacturer indicates the GPRS-A module as one of the typical applications of the ANT-LTE-O antenna.

14. Does the antenna work with the GPRS-A LTE module?

Yes, the documentation lists the GPRS-A LTE as the device with which the ANT-LTE-O antenna is designed to work.

15. Is a specific accessory required to use the antenna with other devices?

Yes, the use of an IPX-SMA adapter is provided for use with other devices, as long as the devices work with supported cellular technologies.

16. Is ANT-LTE-O dedicated to systems manufactured by SATEL?

The antenna is listed as an accessory in the SATEL product line and is intended specifically for use with this manufacturer's panels and modules, although it can also be used with other compatible devices.

17. Does the data sheet provide detailed electrical parameters of the antenna?

The available data sheet mainly provides information about the purpose, compatibility, connector type, supported technologies and mounting method, without specifying additional electrical parameters.

18. Can the antenna improve the quality of communication in the alarm system?

The antenna is designed to work with cellular communicators in alarm systems, and by mounting it on the outside of the housing, it promotes better conditions for cellular signal propagation, which can positively affect the effectiveness of communication.

19. Does the manufacturer allow differencesnice between the description and the supplied product?

The manufacturer notes that the product descriptions posted on the site are for informational purposes only, and the actual appearance of the products may differ from those shown in the photos.

20. Is the ANT-LTE-O classified as an accessory in the offer?

Yes, in the manufacturer's materials the ANT-LTE-O antenna is listed in the accessories category, in the antennas subcategory.

The ANT-LTE-O antenna is an accessory for PBXs and communication modules that require reliable cellular connectivity in LTE, UMTS/HSPA+ and GSM/GPRS/EDGE technologies. With a standard SMA connector and the ability to be mounted on the outside of the chassis, it allows flexibility to fit many system configurations.