PIR motion detector wired SATEL SLIM-PIR indoor Grade 2 15x20 m 12 V DC
- Wired PIR motion detector for burglar alarm systems, detects motion with passive infrared sensor, detection area 15m x 20m at 90° angle when mounted at 2.4m height.
Subscription products in your shopping cart
Set one delivery frequency for all subscription products in your cart every:
Subscription products in your shopping cart
SLIM-PIR - wired PIR motion detector SATEL
The SLIM-PIR detector detects motion in the protected area using a passive infrared (PIR) sensor and is certified in accordance with the requirements of EN 50131 Grade 2. The device is designed for intrusion alarm systems, equipped with a digital detection algorithm, supervision of the detection system and power supply.
- Motion detection using passive infrared sensor (PIR)
- Digital motion detection algorithm and digital temperature compensation
- Wide-angle lens interchangeable with curtain or long-range lens
- Built-in 2EOL parametric resistors: 2 x 1.1 kΩ
- Compliant with EN 50131 Grade 2 and EN 50131-1, EN 50131-2-2, EN 50130-4, EN 50130-5 standards
SLIM-PIR detector characteristics and operation
The SLIM-PIR detector uses a passive infrared (PIR) sensor to detect motion in the protected area, supported by a digital detection algorithm and digital temperature compensation. This solution ensures stable operation over a wide temperature range and in variable environmental conditions.
The device is equipped with a wide-angle lens designed specifically for the SLIM LINE series, providing a detection area of 15m x 20m at an angle of 90° (for mounting at a height of 2.4m). The design with NC relay alarm output and supervision of the detection system and power supply voltage allows safe cooperation with control panels meeting EN 50131 requirements.
Mounting and configuration possibilities
SLIM-PIR can be mounted directly on the wall or on the adjustable BRACKET D ceiling/wall bracket, which facilitates optimum setting of the field of view. The permissible mounting height is up to 4 m, and the recommended mounting height is 2.4 m, at which the declared detection area is achieved.
Adjustable detection sensitivity allows you to match the detector's operation to the specifics of the protected room. The user or installer has an LED indicator with a choice of four light colors, as well as a function to remotely turn the LED indication on and off. Built-in parametric resistors (2EOL: 2 x 1.1 kΩ) facilitate system integration, and tamper protection against opening the housing enhances installation security.
Safety and compliance with standards
The SLIM-PIR detector meets the requirements of Grade 2 protection according to EN 50131-2-2 and complies with EN 50131-1, EN 50131-2-2, EN 50130-4 and EN 50130-5. Environmental Class II according to EN 50130-5 confirms the device can be used in typical indoor conditions, with a maximum humidity of 93±3% and an operating temperature range of -10°C to +55°C.
The device is equipped with NC tamper outputs of 100 mA / 30 V DC and NC relay alarm outputs (resistive load) of 40 mA / 24 V DC. The start-up time of the detector after power-up is 30 seconds, and the alarm signaling time is 2 seconds, which allows the control panel to correctly interpret events.
Technical data SLIM-PIR
| Parameter | Value |
|---|---|
| Type of device | PIR wired motion detector |
| Detection method | Passive infrared sensor (PIR) |
| Detection algorithm | Digital motion detection algorithm |
| Temperature compensation | Digital temperature compensation |
| Standard lens | Wide angle, designed for SLIM LINE series |
| Optional lenses | Curtain lens (CT-CL2), long range lens (LR-CL2) |
| Detection area (for 2.4 m) | 15 m x 20 m, 90° |
| Detectable movement speed | 0.3...3 m/s |
| Alarm signaling time | 2 s |
| Start-up time | 30 s |
| Permissible installation height | Up to 4 m |
| Recommended installation height | 2,4 m |
| Possibility of mounting on the bracket | Adjustable ceiling/wall bracket BRACKET D |
| LED indicator | Yes, alarm indicator |
| LED light colors | 4 colors to choose from |
| LED remote control | Remote on/off of LED indicator |
| Circuit supervision | Supervision of motion detection circuit and supply voltage |
| Tamper protection | Tamper protection against opening the housing (NC tamper outputs) |
| Tamper outputs | NC, 100 mA / 30 V DC |
| Alarm outputs | NC relay, 40 mA / 24 V DC resistive load |
| Relay contact resistance (alarm output) | 26 Ω |
| Parametric resistors | 2EOL: 2 x 1.1 kΩ |
| Power supply voltage | 12 V DC (±15%) |
| Maximum current consumption | 23 mA |
| Standby current consumption | 8 mA |
| Operating temperature range | -10°C...+55°C |
| Maximum humidity | 93±3% |
| Dimensions | 62 x 137 x 42 mm |
| Weight | 100 g |
| Grade of protection according to EN 50131-2-2 | Grade 2 |
| Environmental class in accordance with EN 50130-5 | II |
| Standards met | EN 50131-1, EN 50131-2-2, EN 50130-4, EN 50130-5 |
Technical data source:data sheet of SLIM-PIR model Link
FAQ - frequently asked questions
1. What detection technology does the SLIM-PIR detector use?
The SLIM-PIR detector uses a passive infrared (PIR) sensor supported by a digital motion detection algorithm to detect motion.
2. What is the maximum detection area of the detector?
At the recommended mounting height of 2.4 m, the detection area is 15 m x 20 m at an angle of 90°.
3. At what height should the SLIM-PIR detector be mounted?
The recommended mounting height is 2.4 m, while the permissible mounting height reaches up to 4 m.
4. Are there built-in parametric resistors in the detector?
Yes, the detector has built-in parametric resistors in 2EOL configuration: 2 x 1.1 kΩ.
5. Is it possible to change the type of lens in the SLIM-PIR detector?
Yes, the standard wide-angle lens can be changed to a curtain lens CT-CL2 or long-range lens LR-CL2.
6. Does the detector have an LED indicator to indicate violations?
Yes, the device is equipped with an LED indicator whose light color can be selected from four available and which can be remotely switched on and off.
7. What is the start-up time of the detector after power-up?
The start-up time of the SLIM-PIR detector is 30 seconds.
8. How long does it take for the detector to signal an alarm?
The detector's alarm signaling time is 2 seconds.
9. What is the power supply voltage of the detector?
The detector is powered by 12 V DC with a tolerance of ±15%.
10. What is the current consumption of the SLIM-PIR detector?
The maximum current consumption is 23 mA, while the standby current consumption is 8 mA.
11. What alarm outputs does the detector have?
The device is equipped with an NC relay alarm output of 40 mA / 24 V DC (resistive load) and NC tamper outputs of 100 mA / 30 V DC.
12. Is the SLIM-PIR protected against tampering?
Yes, the detector has tamper protection against opening of the housing realized by means of NC tamper outputs.
13. What standards does the SLIM-PIR detector meet?
The detector meets the requirements of EN 50131-1, EN 50131-2-2, EN 50130-4 and EN 50130-5.
14. What grade of protection is the detector qualified for?
SLIM-PIR has a Grade 2 protection level in accordance with EN 50131-2-2.
15. In what environmental conditions can the detector operate?
The operating temperature range is -10°C to +55°C, and the maximum humidity is 93±3%, with environmental class II according to EN 50130-5.
16. What are the dimensions and weight of the detector?
The dimensions of the detector are 62 x 137 x 42 mm, and the weight is 100 g.
17. Can the detector be mounted on an adjustable bracket?
Yes, the device can be mounted on an adjustable BRACKET D ceiling/wall mount.
18. What speed of motion can the SLIM-PIR detector detect?
The detector detects motion with a speed ranging from 0.3 to 3 m/s.
SLIM-PIR is a wired PIR motion detector designed for intrusion detection systems meeting the requirements of Grade 2 according to EN 50131-2-2. The device is characterized by a wide detection area, extensive diagnostic functions and simple integration with control panels thanks to built-in parametric resistors.