PIR motion detector MW alarm system SATEL APMD-250 wall wireless ABAX 2 range 15 m 24 m
- Wireless PIR+MW motion detector for ABAX 2/ABAX systems, is used for motion detection in burglar alarm system, detection area 15m x 24m at 90°.
Subscription products in your shopping cart
Set one delivery frequency for all subscription products in your cart every:
Subscription products in your shopping cart
APMD-250 - PIR+MW wireless motion detector for ABAX 2/ABAX system
APMD-250 is a wireless motion detector using PIR and microwave detection paths, designed to operate in a two-way ABAX 2/ABAX system. The device meets EN 50131 Grade 2 requirements, offering a wide detection area of 15m x 24m at 90° and very high false alarm immunity.
- Two detection paths: PIR (dual pyroelement) and microwave (MW)
- Detection area: up to 15 m x 24 m, 90° angle
- Two-way radio communication in ABAX 2 and ABAX systems with AES encryption
- Built-in temperature sensor with measurement from -10°C to +55°C
- CR123A 3 V battery power supply with ECO option to extend operating time up to 2 years
Description and application
The APMD-250 wireless motion detector is designed for use in ABAX 2 and ABAX two-way wireless systems, where it is an element of an intrusion detection system. For motion detection, it simultaneously uses a passive infrared sensor (PIR) with a double pyroelement and a microwave (MW) path, which significantly increases the effectiveness of intruder detection and resistance to interference. The detector is characterized by high resistance to false alarms and supervision of the detection system, which signals possible malfunctions.
As standard, the APMD-250 is equipped with a modern wide-angle lens, which provides a maximum detection area of 15 m x 24 m at an angle of 90°. It is possible to replace the lens with a curtain lens (CT-CL) or a long-range lens (LR-CL), which allows to adjust the detection characteristics to the specifics of the protected area. The use of an adjustable mirror also makes it possible to protect the detector's approach zone. An LED indicator signaling violations in test mode facilitates the process of commissioning and site selection.
Connectivity, configuration and power supply
The APMD-250 detector works with ABAX 2 system controllers (ACU-220, ACU-280) and ARU-200 retransmitter, as well as with ABAX system controllers (ACU-120, ACU-270, ACU-250, ACU-100 version min. 4.04), INTEGRA 128-WRL control panel and ARU-100 retransmitter - the required software version of each device should be checked in their descriptions in each case. The range of radio communication in the open area is up to 2000 m in ABAX 2 system with ACU-220 controller and up to 1600 m with ACU-280, while in ABAX system it is up to 500 m with ACU-270 and ACU-120 controllers. Radio communication in ABAX 2 system is encrypted in AES standard, and configuration and update of the detector software are performed remotely.
The APMD-250 is powered by a CR123A 3 V battery, features low current consumption (75 µA in standby), and has a running battery check. The ECO function, available in the ABAX 2 system, allows up to four times the operating time on a single battery, and the expected battery life is up to 2 years depending on the conditions of thepLoatation. The detector belongs to environmental class II according to EN 50130-5, can operate in a temperature range of -10°C to +55°C with a maximum humidity of 93±3%, and is equipped with tamper protection against opening the housing and detachment from the ground, as well as an adjustable bracket for wall or ceiling mounting.
Specifications
| Parameter | Value |
|---|---|
| Model | APMD-250 |
| Type of device | Wireless PIR+MW motion detector for ABAX 2/ABAX system |
| Detection paths | PIR (dual pyroelement) and microwave (MW) |
| Detection area | 15 m x 24 m, 90° angle (maximum detection area) |
| Standard lens | Modern wide-angle lens |
| Optional lenses | Curtain CT-CL, long-range LR-CL |
| Approach zone control | On/off capability, adjustable mirror |
| Detectable movement speed | 0.3...3 m/s |
| Grade of protection according to EN 50131-2-4 | Grade 2 (mounting directly to wall) |
| Standards complied with | EN 50131-1, EN 50130-4, EN 50130-5 |
| Environmental class in accordance with EN 50130-5 | II |
| Operating / measuring temperature range | -10°C...+55°C (temperature measurement and working range) |
| Accuracy of temperature measurement | ±1°C |
| Built-in temperature sensor | Yes, measurement range -10°C...+55°C |
| Power supply | CR123A 3 V battery |
| Expected battery life | Up to 2 years |
| ECO function | Yes, only in ABAX 2; allows up to four times longer operating time |
| Standby current consumption | 75 µA |
| Maximum current consumption | 13 mA |
| Radio operating frequency band | 868.0 ÷ 868.6 MHz |
| Microwave frequency | 24.125 GHz |
| Range of radio communication (ABAX 2, ACU-220) | Up to 2000 m (in open area) |
| Radio communication range (ABAX 2, ACU-280) | Up to 1600 m (in an open area) |
| Radio communication range (ABAX, ACU-270) | Up to 500 m (in open area) |
| Radio communication range (ABAX, ACU-120) | Up to 500 m (in open area) |
| Update and configuration | Remote configuration and remote software update |
| Transmission encryption (ABAX 2) | AES |
| Cooperation - ABAX 2 controllers | ACU-220, ACU-280, ARU-200 retransmitter |
| Cooperation - ABAX system | ACU-120, ACU-270, ACU-250, ACU-100 (min. version 4.04), INTEGRA 128-WRL control panel, ARU-100 retransmitter |
| LED signaling | LED indicator signaling violations in test mode |
| Tamper protection | Against opening the housing and against detachment from the ground |
| Mounting bracket | Adjustable bracket for mounting on wall or ceiling |
| Recommended mounting height | 2...2,4 m |
| Maximum humidity | 93±3% |
| Start-up time | 40 s |
| Dimensions | 62 x 137 x 42 mm |
| Weight | 152 g |
Technical data source:data sheet of APMD-250 model Link
FAQ - the most common questions about APMD-250
Question 1: For which wireless systems is the APMD-250 detector designed?
Answer: APMD-250 is designed to work in ABAX 2 and ABAX two-way wireless systems.
Question 2: What detection paths does the APMD-250 use?
Answer: The detector uses two detection paths: a PIR passive infrared sensor with dual pyroelement and a MW microwave path.
Question 3: What is the maximum detection area of the detector?
Answer: The maximum detection area is 15m x 24m with a 90° angle.
Question 4: Is it possible to change the standard characteristics of the lens?
Answer: Yes, the standard wide-angle lens can be replaced with a curtain CT-CL or long-range LR-CL lens.
Question 5: What are the capabilities of the detector to work with ABAX 2 controllers?
Answer: In ABAX 2 system, the detector works with ACU-220 and ACU-280 controllers and ARU-200 retransmitter.
Question 6: What ABAX system devices can the APMD-250 work with?
Answer: In the ABAX system, the detector works with ACU-120, ACU-270, ACU-250, ACU-100 (min. version 4.04) controllers, INTEGRA 128-WRL control panel and ARU-100 retransmitter.
Question 7: What is the range of radio communication of the detector in an open area?
Answer: In ABAX 2 system with ACU-220, the range is up to 2000 m, with ACU-280 up to 1600 m, and in ABAX system with ACU-270 and ACU-120 up to 500 m.
Question 8: How is the APMD-250 detector powered?
Answer: The detector is powered by a CR123A 3 V battery.
Question 9: What is the expected battery life of the detector?
Answer: The expected battery life is up to 2 years, depending on operating conditions and configuration.
Question 10: What is the ECO function of the APMD-250?
Answer: The ECO function, available in the ABAX 2 system, enables a significant reduction in power consumption, which translates into up to four times longer battery life.
Question 11: In what temperature range can the detector operate?
Answer: The operating temperature range of the detector is from -10°C to +55°C.
Question 12: Does the detector have built-in temperature measurement?
Answer: Yes, APMD-250 has a built-in temperature sensor realizing measurement in the range of -10°C...+55°C with an accuracy of ±1°C.
Question 13: What environmental class is assigned to the detector?
Answer: The detector belongs to environmental class II according to EN 50130-5.
Question 14: What tamper protection does the APMD-250 have?
Answer: The detector has tamper protection against opening the housing and against detachment from the ground.
Question 15: What is the recommended mounting height of the detector?
Answer: The recommended mounting height is from 2 to 2.4 m.
Question 16: Is it possible to remotely configure the detector?
Answer: Yes, APMD-250 allows remote configuration of operating parameters and remote software update.
Question 17: What are the dimensions and weight of the detector?
Answer: The detector's dimensions are 62 x 137 x 42 mm, and its weight is 152 g.
Question 18: How are violations signaled when testing the detector?
Answer: Violations in test mode are signaled by the built-in LED indicator.
Question 19: What is the maximum permissible ambient humidity during detector operation?
Answer: The maximum humidity is 93±3%.
Question 20: What is the start-up time of the detector after power-up?
Answer: The start-up time of the APMD-250 detector is 40 seconds.
Summary
APMD-250 is a two-way wireless PIR+MW motion detector for ABAX 2 and ABAX systems, providing a wide detection area, high false alarm immunity and EN 50131 Grade 2 compliance. With its ECO function, built-in temperature measurement, extensive tamper protection and remote configuration and software update, it is a versatile component of a modern intrusion detection system.