Wireless PIR motion detector SATEL MPD-310 Pet internal 20 kg pet immunity 433 MHz
- Wireless PIR motion detector for systems SATEL, for motion detection in the room, resistant to animals up to 20 kg, with a maximum detection area of 14 m x 12 m
Subscription products in your shopping cart
Set one delivery frequency for all subscription products in your cart every:
Subscription products in your shopping cart
MPD-310 Pet - pet resistant wireless PIR motion detector
MPD-310 Pet is a wireless PIR motion detector for SATEL alarm systems , designed to detect motion in the protected area. The device works with selected control panels and modules SATEL, offering motion detection with resistance to pets up to 20 kg.
- Wireless PIR motion detector for systems SATEL
- Resistance to pet movement of up to 20 kg
- Maximum detection area of 14 m x 12 m
- Encrypted radio transmission in the 433.05 ÷ 434.79 MHz band
- Expected battery life of up to 3 years (power saving mode)
Application and cooperation with devices SATEL
The MPD-310 Pet detector is used for indoor motion detection in intrusion alarm systems using a passive infrared (PIR) sensor. It is supported by PERFECTA control panels (WRL and PERFECTA 64 M models with PERFECTA-RF module attached), VERSA-MCU controller, MTX-300 controller and MICRA alarm module (software version 2.02 or later).
Radio signals from the detector can be retransmitted by the MRU-300 module, which allows for flexible expansion of communication range in extended facilities. Thanks to encrypted radio transmission in the 433 MHz frequency band, secure communication with the control panel or controller is ensured.
Detection and security functions
The MPD-310 Pet uses a passive infrared sensor with a wide-angle lens with a maximum detection area of 14m x 12m and a digital motion detection algorithm with digital temperature compensation. The detector features resistance to animal movement of up to 20 kg, which reduces false alarms in the presence of small pets.
The device is equipped with LEDs for signaling, supervision of the motion detection system, battery monitoring and tamper protection against opening the housing and against detachment from the ground. It meets the requirements of EN 50131-1, EN 50130-4, EN 50130-5, has Grade 2 protection and environmental class II according to EN 50130-5.
Operating parameters and installation
Expected battery life with power saving mode is up to 3 years, using CR123A 3 V battery. The detector operates in the frequency band 433.05 ÷ 434.79 MHz, and the radio communication range in open areas reaches up to 250 m for MRU-300, up to 500 m for MICRA / VERSA-MCU / MTX-300, and up to 600 m for PERFECTA control panels.
The recommended mounting height of the detector is 2.4 m, and the operating temperature range is -10°C to +55°C, with a maximum humidity of 93±3%. The compact housing with dimensions of 62 x 137 x 42 mm and weight of 122 g facilitate installation in typical residential and commercial areas.
Technical data
| Parameter | Value |
|---|---|
| Model | MPD-310 Pet |
| Type of device | Wireless PIR motion detector |
| Type of detection | Passive infrared (PIR) sensor |
| Lens | Wide angle |
| Maximum detection area | 14 m x 12 m |
| Detection area (high sensitivity) | 14 m x 12 m, 84° |
| Detection area (normal sensitivity) | 9.8 m x 6 m, 58° |
| Pet immunity | Up to 20 kg |
| Detectable motion speed | 0.3...3 m/s |
| Operating frequency band | 433.05 ÷ 434.79 MHz |
| Radio communication range (open area) - MRU-300 | Up to 250 m |
| Radio communication range (open area) - MICRA / VERSA-MCU / MTX-300 | Up to 500 m |
| Radio communication range (open area) - PERFECTA | Up to 600 m |
| Expected battery life (power saving mode) | Up to 3 years |
| Battery | CR123A 3 V |
| Standby current consumption | 45 µA |
| Maximum current consumption | 48 mA |
| Start-up time | 15 s |
| Degree of protection according to EN 50131-2-2 | Grade 2 |
| Standards complied with | EN 50131-1, EN 50130-4, EN 50130-5 |
| Environmental class in accordance with EN 50130-5 | II |
| Operating temperature range | -10°C...+55°C |
| Maximum humidity | 93±3% |
| Recommended installation height | 2,4 m |
| Housing dimensions | 62 x 137 x 42 mm |
| Weight | 122 g |
| Tamper protection | Against opening the housing and against detachment from the ground |
| Additional features | Supervision of motion detection system, battery check, LED indication |
| Radio transmission type | Encrypted |
| Possibility of signal retransmission | Yes, through MRU-300 module |
| Cooperation with devices | PERFECTA WRL control panels, PERFECTA 64 M with PERFECTA-RF, VERSA-MCU controller, MTX-300 controller, MICRA module (from version 2.02) |
Technical data source:data sheet of MPD-310 Pet Link
FAQ - frequently asked questions
1. For which alarm systems is the MPD-310 Pet detector designed?
The MPD-310 Pet detector is designed for cooperation with PERFECTA control panels (WRL and PERFECTA 64 M models with PERFECTA-RF module), VERSA-MCU and MTX-300 controllers and MICRA alarm module (from software version 2.02).
2. Is the MPD-310 Pet detector pet resistant?
Yes, the detector is resistant to pet movement of up to 20 kg, which helps reduce false alarms caused by small pets.
3. What is the maximum detection area of the detector?
The maximum detection area of the MPD-310 Pet detector is 14m x 12m using a wide-angle lens.
4. In what frequency band does the MPD-310 Pet detector operate?
The detector operates in the frequency band 433.05 ÷ 434.79 MHz using encrypted radio transmission.
5. What is the range of the detector's radio communication in an open area?
The range of radio communication in the open area is up to 250 m for MRU-300, up to 500 m for MICRA / VERSA-MCU / MTX-300 and up to 600 m for PERFECTA panels.
6. What is the expected battery life of the MPD-310 Pet detector?
The expected battery life in power saving mode is up to 3 years using CR123A 3 V batteries.
7. What are the mounting requirements for the detector?
The recommended mounting height of the MPD-310 Pet detector is 2.4 m, which provides an optimal detection area in the protected room.
8. In what temperature range can the detector operate?
The operating temperature range of the detector is -10°C to +55°C, with a maximum humidity of 93±3%.
9. What standards does the MPD-310 Pet detector meet?
The detector complies with EN 50131-1, EN 50130-4 and EN 50130-5 and has Grade 2 protection and Environmental Class II according to EN 50130-5.
10. Does the detector have tamper protection?
Yes, the detector has tamper protection against opening the housing and against detachment from the ground.
11. What additional functions does the MPD-310 Pet detector have?
The detector has supervision of the motion detection system, battery monitoring and LEDs for signaling.
12. What is the current consumption of the detector?
The standby current consumption is 45 µA, while the maximum current consumption is 48 mA.
13. What is the start-up time of the detector after power-up?
The start-up time of the MPD-310 Pet detector is 15 seconds.
14. What are the dimensions and weight of the MPD-310 Pet detector?
The dimensions of the detector's housing are 62 x 137 x 42 mm, and the weight of the device is 122 g.
15. Can the signal from the detector be retransmitted?
Yes, radio signals from the detector can be retransmitted by the MRU-300 module.
16. What speed of motion can the detector detect?
The detector detects the movement of objects moving at a speed of 0.3 to 3 m/s.
17. What are the sensitivity modes of the detection area?
The detector offers a high-sensitivity detection area of 14 m x 12 m, 84° and a normal sensitivity of 9.8 m x 6 m, 58°.
18. What version of MICRA module software does the detector work with?
The MPD-310 Pet detector works with MICRA module with software version 2.02 or later.
MPD-310 Pet is a wireless PIR motion detector for alarm systems SATEL, offering wide-angle motion detection with pet immunity up to 20 kg. The device provides encrypted radio communication, meets the requirements of security standards and allows flexible installation in various environmental conditions.