Wireless PIR motion detector SATEL MPD-310 wall wide angle detection range 18x16.5m
- Wireless PIR motion detector MPD-310 for MICRA, PERFECTA, VERSA-MCU and MTX-300 systems, detects motion with passive infrared sensor, detection range up to 18 x 16.5 m
Subscription products in your shopping cart
Set one delivery frequency for all subscription products in your cart every:
Subscription products in your shopping cart
MPD-310 wireless PIR motion detector for MICRA, PERFECTA, VERSA-MCU and MTX-300 systems
MPD-310 is a wireless motion detector that uses a passive infrared (PIR) sensor to detect motion in the protected area. The device works with PERFECTA control panels, MICRA module, VERSA-MCU, MTX-300 controllers and MRU-300 retransmitter.
- Motion detection using a passive infrared (PIR) sensor
- Wide-angle lens with a maximum detection area of 18 x 16.5 m
- Possibility to use curtain lens (CT-CL) or long range lens (LR-CL)
- Encrypted radio transmission in the 433.05 ÷ 434.79 MHz band
- Expected operating time on CR123A battery up to 3 years (power saving mode)
MPD-310 detector characteristics and applications
MPD-310 is designed for wireless intrusion detection systems, especially those based on MICRA system and PERFECTA control panels. The detector performs motion detection using a passive infrared (PIR) sensor, while the digital detection algorithm and digital temperature compensation improve the effectiveness of operation in diverse environmental conditions.
The device can be operated by PERFECTA control panels (WRL and PERFECTA 64 M models with PERFECTA-RF module), VERSA-MCU controller, MTX-300 controller and MICRA alarm module (from software version 2.02). This makes the MPD-310 suitable for both small sites and extended systems where wireless motion detection is required.
Features, lenses and radio communication
As standard, the detector is equipped with a wide-angle lens with a maximum detection area of 18 x 16.5 m. It is possible to use a curtain lens (in the CT-CL cover) or a long-range lens (in the LR-CL cover), which allows to adjust the characteristics of the detection field to the specifics of the protected room. The user can also enable or disable approach zone control, which helps reduce unwanted alarms from very close areas under the detector.
The MPD-310 uses encrypted radio transmission in the 433.05 ÷ 434.79 MHz frequency band, and signals from the detector can be retransmitted by the MRU-300 module. The range of radio communication in the open area is up to 250 m for the MRU-300, up to 500 m for the MICRA / VERSA-MCU / MTX-300, and up to 600 m for the PERFECTA control panels, which provides great flexibility in the deployment of system components.
Security, diagnostics and environmental parameters
The device meets the requirements of EN 50131-1, EN 50130-4 and EN 50130-5 standards and achieves Grade 2 (for direct wall mounting) security level, suitable for professional installations in standard risk facilities. The detector has supervision of the motion detection system, battery monitoring, and tamper protection against opening the housing and detachment from the ground. An LED is used to indicate the status of the device, which facilitates commissioning and service.
The MPD-310 is suitable for operation in a wide temperature range of -10°C to +55°C, with a maximum humidity of 93 ±3%, environmental class II according to EN 50130-5. The recommended mounting height is 2.4 m, and the start-up time after power-up is 15 s. Low standby current consumption (45 µA) and power-saving mode allow an expected operating time of up to 3 years on a single CR123A battery.
Technical data
| Parameter | Value |
|---|---|
| Model | MPD-310 |
| Type of device | Wireless PIR motion detector |
| Detection technology | Passive infrared sensor (PIR) |
| Detection algorithm | Digital motion detection algorithm |
| Temperature compensation | Digital temperature compensation |
| Approach zone control capability | Yes, on/off |
| Standard lens | Wide angle lens |
| Maximum detection area (high sensitivity) | 18 m x 16.5 m, 92° |
| Detection area (normal sensitivity) | 14 m x 11.5 m, 82° |
| Optional lenses can be used | Curtain lens in CT-CL cover, long-range lens in LR-CL cover |
| Detectable movement speed | 0.3...3 m/s |
| LEDs | Yes, for signaling |
| Supervision of detection system | Yes |
| Battery monitoring | Yes |
| Tamper protection | Against opening the case and against tearing off the ground |
| Grade of protection according to EN 50131-2-2 (mounting directly to wall) | Grade 2 |
| Complies with standards | EN 50131-1, EN 50130-4, EN 50130-5 |
| Environmental class in accordance with EN 50130-5 | II |
| Operating frequency band | 433.05 ÷ 434.79 MHz |
| Nature of radio transmission | Encrypted |
| Range of radio communication in open area (for MRU-300) | Up to 250 m |
| Radio communication range in open area (for MICRA / VERSA-MCU / MTX-300) | Up to 500 m |
| Radio communication range in open area (for PERFECTA panels) | Up to 600 m |
| Start-up time | 15 s |
| Current consumption in standby state | 45 µA |
| Maximum current consumption | 48 mA |
| Battery type | CR123A 3 V |
| Expected battery life (power saving mode) | Up to 3 years |
| Recommended installation height | 2,4 m |
| Operating temperature range | -10°C...+55°C |
| Maximum humidity | 93 ±3% |
| Housing dimensions | 62 x 137 x 42 mm |
| Weight | 147 g |
| Compatible devices / control panels | PERFECTA WRL, PERFECTA 64 M with PERFECTA-RF module, VERSA-MCU controller, MTX-300 controller, MICRA module (software version 2.02 or later), MRU-300 retransmitter |
Technical data source:data sheet of MPD-310 model Link
FAQ - Frequently asked questions
1. What alarm systems can the MPD-310 detector be connected to?
MPD-310 works with PERFECTA control panels (WRL models and PERFECTA 64 M with PERFECTA-RF module), VERSA-MCU and MTX-300 controllers and MICRA alarm module (software version 2.02 or later), and radio signals can be retransmitted by MRU-300.
2. What detection technology does the MPD-310 use?
The detector uses a passive infrared (PIR) sensor supported by a digital motion detection algorithm and digital temperature compensation.
3. What is the maximum detection area of the detector?
At high sensitivity, the maximum detection area is 18 m x 16.5 m at an angle of 92°, while at normal sensitivity it is 14 m x 11.5 m at an angle of 82°.
4. Can the characteristics of the detection area be changed?
Yes, the detector allows the use of an optional curtain lens in the CT-CL cover or a long-range lens in the LR-CL cover, which changes the characteristics of the detection field.
5. At what frequency does the MPD-310 radio transmission work?
Radio transmission operates in the frequency band 433.05 ÷ 434.79 MHz and is encrypted.
6. What is the range of radio communication of the detector in the open area?
The range of radio communication in an open area is up to 250 m for MRU-300, up to 500 m for MICRA / VERSA-MCU / MTX-300 and up to 600 m for PERFECTA panels.
7. How long can the detector operate on a single battery?
When operating in power-saving mode, the expected operating time on a CR123A 3 V battery is up to 3 years.
8. What kind of battery is used in the MPD-310?
The detector uses a CR123A lithium battery with a voltage rating of 3 V.
9. Does the detector have tamper protection?
Yes, the MPD-310 is protected against opening the housing and against detachment from the ground.
10. What environmental standards and classes does the detector meet?
The device meets the requirements of EN 50131-1, EN 50130-4 and EN 50130-5, has Grade 2 protection (for mounting directly to the wall) and environmental class II according to EN 50130-5.
11. In what temperature range can the MPD-310 operate?
The detector can operate in a temperature range from -10°C to +55°C.
12. What is the permissible operating humidity of the detector?
The maximum operating humidity is 93 ±3%.
13. What is the recommended mounting height of the detector?
The recommended mounting height of the MPD-310 is 2.4 m.
14. What is the start-up time of the device after applying power?
The start-up time of the detector after applying power is 15 s.
15. Does the detector monitor the status of its battery?
Yes, the built-in battery monitoring function allows monitoring the power level.
16. What are the dimensions and weight of the MPD-310 detector?
The dimensions of the housing are 62 x 137 x 42 mm, and the weight of the device is 147 g.
17. Does the device have optical status indication?
Yes, the detector is equipped with LEDs for signaling, which facilitates installation and diagnostics.
18. What is the current consumption of the detector?
The standby current consumption is 45 µA, while the maximum current consumption is 48 mA.
The MPD-310 is a professional wireless PIR motion detector for intrusion detection systems, meeting the requirements of EN 50131 standards and achieving Grade 2 protection. With a wide range of environmental parameters, long battery life and extensive radio communication features, it will prove useful in many types of facilities.