Grundfos Electronic Circulating Pump Magna1 40-180 F 250 1x230V PN6/10 99221307
Grundfos Electronic Circulating Pump Magna1 40-180 F 250 1x230V PN6/10 99221307
- MAGNA1 40-180 F No. 99221307 Suitable for Heating in commercial buildings Air-conditioning in commercial applications District heating networks Cooling networks Residential heating Industrial heating
Brand
Entity responsible for this product in the EU
GRUNDFOS POMPY SP.Z O.O.More
Address:
KLONOWA 23 BARANOWOPostal code: 62-081City: PRZEŹMIEROWOCountry: PolandE-mail: info_gpl@grundfos.com
Symbol
99221307
Producer code
5712608942808
Series
Warranty
Manufacturer's Index
99221307
MAGNA1
MAGNA1 is an electronic circulation pump designed for simple heating, air conditioning and hot water circulation systems. The device is used in both heating and cooling circuits, as well as in hot water systems (also available in a stainless steel version)
- Simple design that guarantees high energy efficiency and easy integration with building management systems - provides an economical alternative to the MAGNA3 pump
- It provides continuous monitoring of operation (including fault detection) and allows remote control (start/stop) via a digital input
- The double pump function allows automatic switching to the second unit in the event of a failure, so that the system operates with a lower load and the flow is not interrupted
TECHNICAL SPECIFICATIONS
| Potential-free switching contact: | yes |
| Frequency: | 50/60 Hz |
| Installation length: | 250 mm |
| Material grade: | GG 25 cast iron (GJL-250) |
| Pulse counter interface: | no |
| PT100 / PT1000 / PTC interface: | no |
| PWM (Pulse Width Modulation) interface: | no |
| Flange pressure class: | PN 10 |
| Device pressure class: | PN 10 |
| IEC insulation class: | F |
| Oval flange: | no |
| Number of phases: | 1 |
| Max. operating pressure: | 10 bar |
| Max. medium temperature (continuous): | 110 °C |
| Max. capacity (max. flow): | 15.76 m³/h |
| Max. head: | 18 m |
| Body material: | Cast iron |
| Impeller material: | Plastic |
| Minimum medium temperature (continuous): | -10 °C |
| Switching voltage: | 1 x 230 V |
| BACnet IP protocol support: | no |
| BACnet MS/TP protocol support: | no |
| CAN/CANOpen protocol support: | no |
| EtherNet/IP protocol support: | no |
| KNX protocol support: | no |
| LIN Bus protocol support: | no |
| LON/LONWorks protocol support: | no |
| Modbus RTU protocol support: | no |
| Modbus TCP protocol support: | no |
| PROFIBUS protocol support: | no |
| PROFINET IO protocol support: | no |
| RS-232 protocol support: | no |
| RS-485 protocol support: | no |
| Power consumption of pump (solpump): | 615 W |
| Motor power consumption (P1): | 0.615 kW |
| Electrical connection: | Terminals |
| Dual pump: | no |
| Rated current: | 2.71 A |
| Speed: | 4724 1/min |
| Nominal flow rate (BEP): | 15.76 m³/h |
| Motor speed control: | Built-in |
| Connection type: | Flange |
| Pump body connection size: | DN 40 |
| Speed control method: | Stepless |
| Wireless communication standard (2G/3G/4G, 5G, Bluetooth, WLAN 802.11): | not |
| Degree of protection (IP): | IPX4 |
| Interface signal 0-10 V / 2-10 V: | no |
| Interface signal 0-20 mA / 4-20 mA: | no |
| Width 1: | 73 mm |
| Width 2: | 164 mm |
| Average temperature (continuous operation): | -10 ... 110 °C |
| Nominal diameter: | DN 40 |
| Ambient temperature: | 0 ... 40 °C |
| Energy efficiency index (EEI): | 0.2 |
| Pump switch: | Other |
| Head at nominal flow: | 85.1 kPa |
| Head at nominal flow (BEP): | 85.85 kPa |
| Pump height: | 304 mm |
| Rated voltage range: | 230 ... 230 V |
| Communication connector: | Possible with accessories |
Ask a question