Grundfos Magna1 25-40 180 1x230V PN10 Electronic Circulating Pump 99221216
Grundfos Magna1 25-40 180 1x230V PN10 Electronic Circulating Pump 99221216
- MAGNA1 25-40 No. 99221216 Suitable for Heating in commercial buildings Air-conditioning in commercial applications District heating networks Cooling networks Residential heating Industrial heating
Brand
Entity responsible for this product in the EU
GRUNDFOS POMPY SP.Z O.O.More
Address:
KLONOWA 23 BARANOWOPostal code: 62-081City: PRZEŹMIEROWOCountry: PolandE-mail: info_gpl@grundfos.com
Symbol
99221216
Producer code
5712608941894
Series
Warranty
Manufacturer's Index
99221216
Magna1 25-40 pump (No. 99221216)
MAGNA1 is an electronic circulation pump dedicated to simple heating, air conditioning and hot water circulation systems. The device is used in
- Heating in commercial buildings
- Air conditioning in commercial applications
- District heating networks
- Cooling networks
- Heating in single-family homes
- Industrial heating
The MAGNA1 is a pump for heating and cooling circuits, also available in a stainless steel version for domestic hot water. The simple design guarantees best-in-class energy efficiency and easy connection to building management systems - a cost-effective alternative to the MAGNA3 pump
- Continuous monitoring of operation, including fault detection,
- Remote start and stop of the pump via digital input,
- Dual pump function - in case of failure, the efficient unit takes over the entire flow, reducing the load on the system.
TECHNICAL SPECIFICATIONS
| Potential-free switching contact: | yes |
| Frequency: | 50/60 Hz |
| Installation length: | 180 mm |
| Material grade: | GG 20 cast iron (GJL-200) |
| Pulse counter interface: | no |
| PT100 / PT1000 / PTC interface: | no |
| PWM (pulse width modulation) interface: | no |
| Flange pressure class: | PN 10 |
| Device pressure class: | PN 10 |
| IEC insulation class: | F |
| Oval flange: | no |
| Number of phases: | 1 |
| Max. operating pressure: | 10 bar |
| Max. medium temperature (continuous): | 110 °C |
| Max. capacity (max. flow): | 3.73 m³/h |
| Max. head: | 4 m |
| Body material: | Cast iron |
| Impeller material: | Plastic |
| Minimum medium temperature (continuous): | -10 °C |
| Switching voltage: | 1 x 230 V |
| Protocol support (BACnet IP, BACnet MS/TP, CAN/CANOpen, EtherNet/IP, KNX, LIN Bus, LON/LONWorks, Modbus RTU, Modbus TCP, PROFIBUS, PROFINET IO, RS-232, RS-485): | no |
| Power consumption of pump (solpump): | 56 W |
| Motor power consumption (P1): | 0.056 kW |
| Electrical connection: | Other |
| Dual pump: | not |
| Rated current: | 0.45 A |
| Speed: | 2858 1/min |
| Nominal flow rate (BEP): | 3.73 m³/h |
| Motor speed control: | Built-in |
| Connection type: | External cylindrical gas thread (BSPP) |
| Pump body connection size: | 1 1/2 inches |
| Speed control method: | Stepless |
| Wireless communication standard (2G/3G/4G, 5G, Bluetooth, WLAN 802.11): | not |
| Degree of protection (IP): | IPX4 |
| Interface signal (0-10 V / 2-10 V, 0-20 mA / 4-20 mA): | no |
| Width 1: | 69 mm |
| Width 2: | 111 mm |
| Average temperature (continuous operation): | -10 ... 110 °C |
| Nominal diameter: | DN 32 |
| Ambient temperature: | 0 ... 40 °C |
| Energy efficiency index (EEI): | 0.2 |
| Pump switch: | Other |
| Head at nominal flow: | 56.18 kPa |
| Head at nominal flow (BEP): | 59.32 kPa |
| Pump height: | 142 mm |
| Rated voltage range: | 230 ... 230 V |
| Communication connector: | Possible with accessories |
Ask a question