Grundfos Magna1 32-100 180 1x230V PN10 Electronic Circulating Pump 99221236
Grundfos Magna1 32-100 180 1x230V PN10 Electronic Circulating Pump 99221236
- MAGNA1 32-100 No. 99221236 Suitable for Heating in commercial buildings Air-conditioning in commercial applications District heating networks Cooling networks Residential heating Industrial heating
Brand
Entity responsible for this product in the EU
GRUNDFOS POMPY SP.Z O.O.More
Address:
KLONOWA 23 BARANOWOPostal code: 62-081City: PRZEŹMIEROWOCountry: PolandE-mail: info_gpl@grundfos.com
Symbol
99221236
Producer code
5712608942099
Series
Warranty
Manufacturer's Index
99221236
MAGNA1
MAGNA1 is an electronic circulation pump dedicated to simple heating, air conditioning and hot water circulation systems. The device works well in heating and cooling circuits, as well as in a stainless steel version dedicated to domestic hot water
- Simple design for superior energy efficiency and easy integration with building management systems - an economical alternative to the MAGNA3 pump
- Continuous operation monitoring (including fault detection) and remote control (start/stop) capability via digital input
- Dual pump function - in case of failure, one unit automatically takes over the entire flow, reducing the load on the system
TECHNICAL SPECIFICATIONS
| Potential-free switching contact: | yes |
| Frequency: | 50/60 Hz |
| Installation length: | 180 mm |
| Material grade: | GG 20 cast iron (GJL-200) |
| Pulse counter interface: | no |
| PT100 / PT1000 / PTC interface: | no |
| PWM (pulse width modulation) interface: | no |
| Flange pressure class: | PN 10 |
| Device pressure class: | PN 10 |
| IEC insulation class: | F |
| Oval flange: | no |
| Number of phases: | 1 |
| Max. operating pressure: | 10 bar |
| Max. medium temperature (continuous): | 110 °C |
| Max. capacity (max. flow): | 5.25 m³/h |
| Max. head: | 10 m |
| Body material: | Cast iron |
| Impeller material: | Plastic |
| Minimum medium temperature (continuous): | -10 °C |
| Switching voltage: | 1 x 230 V |
| BACnet IP protocol support: | no |
| BACnet MS/TP protocol support: | no |
| CAN/CANOpen protocol support: | no |
| EtherNet/IP protocol support: | no |
| KNX protocol support: | no |
| LIN Bus protocol support: | no |
| LON/LONWorks protocol support: | no |
| Modbus RTU protocol support: | no |
| Modbus TCP protocol support: | no |
| PROFIBUS protocol support: | no |
| PROFINET IO protocol support: | no |
| RS-232 protocol support: | no |
| RS-485 protocol support: | no |
| Power consumption of pump (solpump): | 175 W |
| Motor power consumption (P1): | 0.175 kW |
| Electrical connection: | Other |
| Dual pump: | no |
| Rated current: | 1.41 A |
| Speed: | 4534 1/min |
| Nominal flow rate (BEP): | 5.25 m³/h |
| Motor speed control: | Built-in |
| Connection type: | External cylindrical gas thread (BSPP) |
| Pump body connection size: | 2 inches |
| Speed control method: | Stepless |
| Wireless communication standard (2G/3G/4G, 5G, Bluetooth, WLAN 802.11): | not |
| Degree of protection (IP): | IPX4 |
| Interface signal (0-10 V / 2-10 V, 0-20 mA / 4-20 mA): | no |
| Width 1: | 69 mm |
| Width 2: | 111 mm |
| Average temperature (continuous operation): | -10 ... 110 °C |
| Nominal diameter: | DN 32 |
| Ambient temperature: | 0 ... 40 °C |
| Energy efficiency index (EEI): | 0.2 |
| Pump switch: | Other |
| Head at nominal flow: | 64.81 kPa |
| Head at nominal flow (BEP): | 70.51 kPa |
| Pump height: | 142 mm |
| Rated voltage range: | 230 ... 230 V |
| Communication connector: | Possible with accessories |
Ask a question