Grundfos Magna1 32-120 F 220 1x230V PN6/10 Electronic Circulating Pump 99221285
Special offer
Grundfos Magna1 32-120 F 220 1x230V PN6/10 Electronic Circulating Pump 99221285
- Suitable for Heating in commercial buildings Air-conditioning in commercial applications District heating networks Cooling networks Residential heating Industrial heating
Brand
Entity responsible for this product in the EU
GRUNDFOS POMPY SP.Z O.O.More
Address:
KLONOWA 23 BARANOWOPostal code: 62-081City: PRZEŹMIEROWOCountry: PolenE-mail: info_gpl@grundfos.com
Symbol
99221285
Producer code
5712608942587
Series
Warranty
Manufacturer's Index
99221285
Magna1 32-120 F 220 1x230V PN6/10 pump 99221285
MAGNA1 - electronic circulation pump for simple heating, air conditioning and hot water circulation systems
- The Magna1 is a pump for heating and cooling circuits, and also comes in a stainless steel version for domestic hot water.
- The MAGNA1 is a simple pump with best-in-class energy efficiency and a simple connection for integration into building management systems. It is an economical alternative to the MAGNA3 pump.
- Provides continuous monitoring, including pump failure. Remote start/stop of the pump via digital input.
- MAGNA1's dual pump function ensures flow by automatically switching to a second pump in the event of a failure. The two pumps work together with a lower load, and in the event of a failure, the efficient pump takes over the entire flow.
TECHNICAL DATA
| Potential-free switching contact: | yes |
| Frequency: | 50/60 Hz |
| Installation length: | 220 mm |
| Material grade: | GG 25 cast iron (GJL-250) |
| Pulse counter interface: | no |
| PT100 / PT1000 / PTC interface: | no |
| PWM (Pulse Width Modulation) interface: | no |
| Flange pressure class: | PN 10 |
| Device pressure class: | PN 10 |
| IEC insulation class: | F |
| Oval flange: | no |
| Number of phases: | 1 |
| Max. operating pressure: | 10 bar |
| Max. medium temperature (continuous): | 110 °C |
| Max. capacity (max. flow): | 11.22 m3/h |
| Max. head: | 12 m |
| Body material: | Cast iron |
| Impeller material: | Plastic |
| Minimum medium temperature (continuous): | -10 °C |
| Switching voltage: | 1 x 230 V |
| BACnet IP protocol support: | no |
| BACnet MS/TP protocol support: | no |
| CAN/CANOpen protocol support: | no |
| EtherNet/IP protocol support: | no |
| KNX protocol support: | no |
| LIN Bus protocol support: | no |
| LON/LONWorks protocol support: | no |
| Modbus RTU protocol support: | no |
| Modbus TCP protocol support: | no |
| PROFIBUS protocol support: | no |
| PROFINET IO protocol support: | no |
| RS-232 protocol support: | no |
| RS-485 protocol support: | no |
| Power consumption of pump (solpump): | 329 W |
| Motor power consumption (P1): | 0.329 kW |
| Electrical connection: | Terminals |
| Dual pump: | no |
| Rated current: | 1.48 A |
| Speed: | 4754 1/min |
| Nominal flow rate (BEP): | 11.22 m3/h |
| Motor speed control: | Built-in |
| Connection type: | Flange |
| Pump body connection size: | DN 32 |
| Speed control method: | Stepless |
| Wireless communication standard 2G / 3G / 4G: | no |
| 5G wireless communication standard: | no |
| Bluetooth wireless communication standard: | no |
| WLAN 802.11 wireless communication standard: | no |
| Degree of protection (IP): | IPX4 |
| Interface signal 0-10 V / 2-10 V: | no |
| Interface signal 0-20 mA / 4-20 mA: | no |
| Width 1: | 73 mm |
| Width 2: | 164 mm |
| Average temperature (continuous operation): | -10 ... 110 °C |
| Nominal diameter: | DN 32 |
| Ambient temperature: | 0 ... 40 °C |
| Energy efficiency index (EEI): | 0.2 |
| Pump switch: | Other |
| Head at nominal flow: | 65 kPa |
| Head at nominal flow (BEP): | 65.27 kPa |
| Pump height: | 301 mm |
| Rated voltage range: | 230 ... 230 V |
| Communication connector: | Possible with accessories |
Ask a question