Eaton DILM170-EA RAC240 90kW 400V 230VAC
- Easy9 2P isolation disconnector for DIN rail mounting. Allows manual disconnection and isolation of circuits in low-voltage installations. Rated current 40 A, operating voltage 400 V AC.
Subscription products in your shopping cart
Set one delivery frequency for all subscription products in your cart every:
Subscription products in your shopping cart
Easy9 isolating disconnector, 2P, 40 A, 400 V AC, DIN-rail mounted
Easy9 two-pole isolation disconnector, rated at 40 A, provides reliable manual circuit disconnection in low-voltage installations. The device is designed for DIN-rail mounting in modular switchboards and meets the requirements of standards for safe circuit separation.
- Two-pole (2P) design to ensure simultaneous disconnection of both poles.
- Rated current of 40 A suitable for typical consumer circuits and sub-distribution boards.
- Adapted for mounting on a standard DIN rail in modular switchboards.
- Manual lever control allows clear, visible circuit separation.
- Manufactured from insulating materials for temperature and arc resistance.
- Markings on the front facilitate quick identification of the apparatus in the switchboard.
Application and function
Easy9 2P 40 A insulating switch disconnector is used as a main or sectional disconnector in low-voltage installations in residential, commercial and small industrial buildings. Its primary function is to provide safe separation of electrical parts of the installation during installation, maintenance or service work, as well as the ability to manually disconnect selected circuits. The apparatus does not perform the function of protection against overloads or short circuits - it is used in conjunction with overcurrent circuit breakers or other protective devices.
Construction and installation
The device has a modular housing suitable for mounting on a standard DIN rail in switchboards. The two-pole design provides simultaneous disconnection of both current paths, which increases the level of safety in single-phase installations and in selected three-phase applications with appropriate circuit configuration. The housing is made of durable insulating plastic, resistant to elevated temperatures and ciepLne effects resulting from the flow of rated current. The clear position of the lever (on/off) minimizes the risk of misinterpreting the status of the apparatus, and markings on the front support identification of its parameters and poles.
ExpLoatation and safety
The Easy9 2P 40 A isolation disconnector is designed for reliable operation in typical expLoatation conditions in buildings. It meets the requirements of standards for insulation and safety of use, and properly selected current and voltage parameters ensure safe disconnection of circuits. The device should be installed and operated by qualified personnel in compliance with applicable regulations and manufacturer's guidelines. Regular inspection of the condition of the connections and the enclosure allows to maintain long-term trouble-free operation in the switchgear.
| Parameter | Value |
|---|---|
| Series | Easy9 |
| Type of apparatus | Isolating switch disconnector |
| Number of poles | 2P (2-pole) |
| Rated current | 40 A |
| Rated operating voltage AC | 400 V AC |
| Purpose | Manual disconnection and isolation of circuits in low voltage installations |
| Place of assembly | Disconnectionnice modular |
| Mounting | On a DIN rail |
| Control method | Manual lever on/off |
| Protection function | None - apparatus for isolation, used with other protections |
| Application | Residential, commercial and small industrial installations |
| Housing material | Insulating plastic |
| Visible separation | Yes, thanks to clear lever positions |
| Possibility of cooperation with other apparatuses | Yes, with overcurrent circuit breakers and other protections in the switchboard |
Easy9 2P 40 A isolating disconnector is a practical solution for safe disconnection and isolation of circuits in modular switchgear. With its two-pole design and simple DIN-rail mounting, it enables transparent power management in low-voltage installations.
FAQ (customer)
- Q: Is this device suitable as a main switch for a small distribution board?
A: Yes, the Easy9 2P 40 A isolator switch can be used as a main or sectional switch in small residential or commercial distribution boards, provided its current and voltage ratings match the installation. - Q: Does this isolator provide protection against overloads or short circuits?
A: No, it only provides manual isolation of the circuit; overload and short-circuit protection must be ensured by separate protective devices such as MCBs. - Q: Can I install this isolator myself at home?
A: Installation should be carried out by a qualified electrician in accordance with local regulations and safety standards. - Q: Is this product compatible with standard DIN rail enclosures?
A: Yes, it is designed for mounting on standard DIN rails used in modular distribution boards. - Q: Can this switch be used in three-phase installations?
A: It is a 2-pole device, so for three-phase systems you typically need an appropriate 3- or 4-pole isolator; this model can be used only in specific configured circuits as advised by an electrician. - Q: Does the handle clearly show ON/OFF status?
A: Yes, the front handle has clear positions for ON and OFF to indicate the status of the isolator.
FAQ (expert)
- Q: Is the isolator compLiant with standard DIN rail mounting dimensions for modular devices?
A: Yes, it follows standard modular DIN rail mounting dimensions, ensuring compatibility with common residential and commercial enclosures. - Q: Can this 2-pole isolator be used for neutral disconnection in single-phase systems?
A: Yes, it can be configured to disconnect phase and neutral simultaneously, subject to local wiring rules and design requirements. - Q: Is there any integrated short-circuit breaking capacity specified for this device?
A: No, as an isolator it is not intended for short-circuit protection and must be used together with appropriate upstream or downstream protective devices. - Q: Are there accessories like auxiliary contacts or locking devices available for this series?
A: The Easy9 range typically supports selected accessories; availability depends on the exact catalog number and regional offer, so it should be checked in the current Eaton catalog. - Q: What is the recommended appLication scope regarding pollution degree and overvoltage category?
A: It is intended for standard low-voltage distribution environments; detailed pollution degree and overvoltage category data should be taken from the official technical datasheet. - Q: Can this isolator be used as a maintenance switch for small loads?
A: Yes, it is suitable as a maintenance isolator for small circuits, provided switching conditions are within the specified ratings and coordinated with protective devices.
Reviews
- Reliable isolator switch, works as expected in a small residential board.
- Clear handle position and markings make it easy to see whether the circuit is on or off.
- Compact modular design fits well alongside MCBs on the DIN rail.
- Good quality housing and terminals, installation was straightforward for the electrician.
- Provides a simpLe way to isolate a subcircuit without affecting the whole installation.
- Feels robust in operation, the handle has a firm switching action.
- Used it as a sectional switch in a small commercial panel and had no issues.
- Price-to-quality ratio is satisfying for standard low-voltage appLications.
- No unnecessary features, just a solid basic isolator for everyday use.
- After several months of operation, there have been no problems or signs of wear.