Product description
UNILIFT KP.150.AV.1 is a vertical, single-stage submersible pump made of stainless steel, designed for dewatering. The device is equipped with a vertical discharge nozzle and an inlet basket, which allows efficient pumping of ground, surface and rainwater. The pump also has a carrying handle and comes with a 5-meter power cable and a vertical level connector for automatic on/off
A semi-open impeller with a 10-mm free passage allows liquid to flow through, while a double seal system with two self-sealing rings and a grease fill ensure reliable operation. The pump's outer casing ensures continuous cooling of the motor by the pumped liquid, and the maintenance-free bearings, lubricated by the pumped liquid, further increase the life of the unit
Technical data
Liquid
- Liquid temperature range: 0 - 50 °C
- Liquid temperature during operation: 20 °C
- Density: 998.2 kg/m³
Hydraulic parameters
- Maximum flow rate: 2.36 l/s
- Headroom: 2,94 m
- Maximum particle size: 10 mm
- Approvals: CE, RCM, VDE, LGABG, EAC, TUVRHWID, MORO, UKCA, SEPRO
Materials
- Pump body: Stainless steel (EN 1.4301, AISI 304)
- Pump housing: EN 1.4301
- Impeller: Stainless steel (EN 1.4301, AISI 304)
Installation
- Ambient temperature range: 0 - 50 °C
- Connection type: Rp
- Connection size: 1 1/4 inch
- Maximum installation depth: 2 m
- Installation location: Indoor
Electrical data
- Input power (P1): 300 W
- Output power (P2): 0.15 kW
- Basic frequency: 50 Hz
- Rated voltage: 1 x 220-230 V
- Rated current: 1.3 A
- Capacitor size (operation): 8 µF/400 V
- Protection type (IEC 34-5): IP68
- Insulation class (IEC 85): F
- Power cable length: 5 m
- Plug type: SCHUKO
Other data
- Net weight: 5.84 kg
- Gross weight: 6.55 kg
- Shipping cost: 0.013 m³
- Country of origin: HU
- Customs tariff number: 84137021
- Environmental approvals: WEEE