Product description
Sololift2 WC-3 is a small, compact automatic lifting unit, which is designed for pumping wastewater in private dwellings. The device works especially well where sewage cannot be discharged directly into the sewage system by means of a natural gradient. Sololift2 WC-3 is dedicated to pumping wastewater from toilets where toilet paper and feces are present, with an additional connection on the lid and sides of the tank (such as at the sink, shower or bidet)
Important: pumping liquids containing other materials may lead to failure and limit the warranty
Application
- Toilets, sinks, showersnice and bidets in basements below the sewer level.
- Installations where the main ground pipe does not allow the required slope.
- Renovations and retrofits of existing buildings.
- Connection of a shower sensor.
Equipment of the unit
- Cable with or without plug - see technical data.
- Possibility of installing a discharge hose connector (horizontally or vertically) with adapters for Ø22-40 mm pipes.
- Integrated check valve.
- Dry and efficient motor with thermal protection, pressure switch and controller.
- WC connection hose DN100.
- Two flexible connectors for pipe inlet Ø36 or Ø40 (height adjustable).
- Socket for alarm board with buzzer (accessories).
- Manual anti-clogging function and separate drain connection (for easy service).
- Vent valve with overfill protection.
- Clips for attaching harnesses.
Note: Discharge adapter can be installed vertically or horizontally - vertical installation increases flow (see brochure and diagrams)
Technical data
Working fluid
- Liquid temperature range: 0 °C to 50 °C
- Liquid temperature during operation: 20 °C
- Density: 998.2 kg/m³
Hydraulic parameters
- Pump speed (rpm): 2800 rpm
- Rated flow rate: 1.37 l/s
- Maximum flow rate: 2.48 l/s
- Headroom: 6,21 m
- Impeller type: VORTEX with GRINDER
- Maximum particle size: 25 mm
- Curve tolerance: ISO9906:2012 3B
- Approvals: CE, SEPRO, CHROHS, MORO, AAA
Materials
- Pump body: Composite
- Impeller: Polymer - PPE
- Reservoir: Made of plastic (PP)
Installation
- Ambient temperature range: 0 °C to 40 °C
- Inlet connection type: Smooth pipe (Smooth pipe)
- Outlet connection type: Smooth pipe (Smooth pipe)
- Inlet connection size: Available configurations: 32/36/40, 36/40/50, DN 100, 1/-/1.25, -/1.25/1.5, 4 inch
- Outlet connection size: 22/25/28/32/36/40, 0.5/0.75/-/-/1.25 inch
- Pressure rating for connection: PN 1.5
- Number of conductors of wires: 3x0.75 mm²
Electrical data
- Power consumption (P1): 620 W
- Output power (P2): 0.42 kW
- Basic frequency: 50 Hz
- Rated voltage: 1 x 220-240 V
- Rated current: 3 A
- Power factor (cos φ): 0,92
- Number of poles: 2
- Protection type (IEC 34-5): IP44
- Insulation class (IEC 85): F
- Cable type: H05VV-F-3G
- Power cable length: 1,2 m
- Power plug: SCHUKO
Tank
- Nominal tank capacity: 9 l
Other data
- Net weight: 7.74 kg
- Gross weight: 9.27 kg
- Shipping cost: 0.052 m³
- Danish VVS no: 614363632
- Swedish RSK no: 5886546
- Finnish LVI no: 4965313
- Norwegian NRF no: 9045715
- Country of origin: RS
- Customs tariff number: 84137021
- Environmental approvals: WEEE
Summary
The Sololift2 WC-3 is a compact and reliable lifting unit designed for pumping toilet wastewater, ideal for installation in private residences and retrofitting drainage systems. Equipped with a number of features, such as the ability to be installed in different orientations, integrated check valve, clogging and overflow protection, it is the perfect solution for difficult installation conditions