Grundfos Magna1 32-120 F 220 1x230V PN6/10 Electronic Circulating Pump 99221285
Grundfos Magna1 32-120 F 220 1x230V PN6/10 Electronic Circulating Pump 99221285
- Suitable for Heating in commercial buildings Air-conditioning in commercial applications District heating networks Cooling networks Residential heating Industrial heating
Subscription products in your shopping cart
Set one delivery frequency for all subscription products in your cart every:
Subscription products in your shopping cart
Brand
Entity responsible for this product in the EU
GRUNDFOS POMPY SP.Z O.O.More
Address:
KLONOWA 23 BARANOWOPostal code: 62-081City: PRZEŹMIEROWOCountry: PolskaE-mail: info_gpl@grundfos.com
Symbol
99221285
Producer code
5712608942587
Series
Warranty
Manufacturer's Index
99221285
Magna1 32-120 F 220 1x230V PN6/10 pump 99221285
MAGNA1 - electronic circulation pump for simple heating, air conditioning and hot water circulation systems
- The Magna1 is a pump for heating and cooling circuits, and also comes in a stainless steel version for domestic hot water.
- The MAGNA1 is a simple pump with best-in-class energy efficiency and a simple connection for integration into building management systems. It is an economical alternative to the MAGNA3 pump.
- Provides continuous monitoring, including pump failure. Remote start/stop of the pump via digital input.
- MAGNA1's dual pump function ensures flow by automatically switching to a second pump in the event of a failure. The two pumps work together with a lower load, and in the event of a failure, the efficient pump takes over the entire flow.
TECHNICAL DATA
| Potential-free switching contact: | yes |
| Frequency: | 50/60 Hz |
| Installation length: | 220 mm |
| Material grade: | GG 25 cast iron (GJL-250) |
| Pulse counter interface: | no |
| PT100 / PT1000 / PTC interface: | no |
| PWM (Pulse Width Modulation) interface: | no |
| Flange pressure class: | PN 10 |
| Device pressure class: | PN 10 |
| IEC insulation class: | F |
| Oval flange: | no |
| Number of phases: | 1 |
| Max. operating pressure: | 10 bar |
| Max. medium temperature (continuous): | 110 °C |
| Max. capacity (max. flow): | 11.22 m3/h |
| Max. head: | 12 m |
| Body material: | Cast iron |
| Impeller material: | Plastic |
| Minimum medium temperature (continuous): | -10 °C |
| Switching voltage: | 1 x 230 V |
| BACnet IP protocol support: | no |
| BACnet MS/TP protocol support: | no |
| CAN/CANOpen protocol support: | no |
| EtherNet/IP protocol support: | no |
| KNX protocol support: | no |
| LIN Bus protocol support: | no |
| LON/LONWorks protocol support: | no |
| Modbus RTU protocol support: | no |
| Modbus TCP protocol support: | no |
| PROFIBUS protocol support: | no |
| PROFINET IO protocol support: | no |
| RS-232 protocol support: | no |
| RS-485 protocol support: | no |
| Power consumption of pump (solpump): | 329 W |
| Motor power consumption (P1): | 0.329 kW |
| Electrical connection: | Terminals |
| Dual pump: | no |
| Rated current: | 1.48 A |
| Speed: | 4754 1/min |
| Nominal flow rate (BEP): | 11.22 m3/h |
| Motor speed control: | Built-in |
| Connection type: | Flange |
| Pump body connection size: | DN 32 |
| Speed control method: | Stepless |
| Wireless communication standard 2G / 3G / 4G: | no |
| 5G wireless communication standard: | no |
| Bluetooth wireless communication standard: | no |
| WLAN 802.11 wireless communication standard: | no |
| Degree of protection (IP): | IPX4 |
| Interface signal 0-10 V / 2-10 V: | no |
| Interface signal 0-20 mA / 4-20 mA: | no |
| Width 1: | 73 mm |
| Width 2: | 164 mm |
| Average temperature (continuous operation): | -10 ... 110 °C |
| Nominal diameter: | DN 32 |
| Ambient temperature: | 0 ... 40 °C |
| Energy efficiency index (EEI): | 0.2 |
| Pump switch: | Other |
| Head at nominal flow: | 65 kPa |
| Head at nominal flow (BEP): | 65.27 kPa |
| Pump height: | 301 mm |
| Rated voltage range: | 230 ... 230 V |
| Communication connector: | Possible with accessories |
Ask a question